93885 - 1072D54 ADJUSTABLE AIR DUCTS (V.I.S.) CONTROL ACTUATOR - R.R.

Removing ( Refitting ) - Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 1008C10 Power unit REACTION ROD - Replace1. Disconnect the electrical connection for the timing sensor.
DescriptionConnector
1 Timing sensorK047
2. Disconnect the fuel vapour recovery pipe.3. Disconnect the electrical connection for the adjustable air ducts control actuator.
DescriptionConnector
3 Variable geometry solenoid valveL015
4. Disconnect the ball attachment for the adjustable air ducts control actuator lever.5. Undo the bolts (5a) and remove the adjustable air ducts control actuator (5b) after having disconnected the pipe (5c).
Refitting ( Removing ) - Connect the adjustable air ducts control actuator pipe, then place it in its housing and fasten it using the bolts.- Connect the ball attachment for the adjustable air ducts control actuator lever.- Connect the electrical connection for the adjustable air ducts control actuator.
DescriptionConnector
.Variable geometry solenoid valveL015
- Connect the fuel vapour recovery pipe.- Connect the electrical connection for the timing sensor.
DescriptionConnector
.Timing sensorK047
    See in Op. 1008C10 Power unit REACTION ROD - Replace    See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead, then close the boot.