93955 - 1080B98 LAMBDA SENSORS (all) - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.1. Disconnect the electrical connection for the front Lambda sensor.
DescriptionConnector
1 Lambda sensor on catalyzerK017
2. Undo and remove the front Lambda sensor (2a) using a USAGE 875/22 type spanner (2b) or a similar tool.
1. Disconnect the electrical connection for the rear Lambda sensor.
DescriptionConnector
1 Lambda sensor on catalyzer 2K018
2. Undo and remove the rear Lambda sensor.
Refitting ( Removing ) - Position the rear Lambda sensor in its housing and tighten it to the recommended torque.
Value - daNmFasteningComponentØ  
.4.5-LAMBDA PROBE (ONE)M18 X 1.5
- Connect the electrical connection for the rear Lambda sensor.
DescriptionConnector
.Lambda sensor on catalyzer 2K018
- Position the front Lambda sensor and tighten it to the recommended torque.
Value - daNmFasteningComponentØ  
.4.5-LAMBDA PROBE (ONE)M18 X 1.5
- Connect the electrical connection for the front Lambda sensor.
DescriptionConnector
.Lambda sensor on catalyzerK017
    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Connect the negative battery lead.- Remove the vehicle from the lift.