939010424 - 1016E38 SINGLE CYLINDER HEAD OR (ONE) L OR R, REMOVED - GRINDING

Check that the flatness of the lower cylinder head plane corresponds to the recommended values.

Measurement	Value		Validity
Cylinder head lower surface flatness (mm)	0.1 ± 0.05		1.9 JTD 16V

1. If the planarity of the lower cylinder head plane does not correspond to the recommended figures, regrind it without exceeding the minimum permitted height.

Measurement	Value		Validity
Minimum permitted cylinder head height (mm)	107.00 ± 0.05		1.9 JTD 16V