939005780 - 3330C12 MASTER CYLINDER (PUMP) - R.R. FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting ) 1. Replace the brake-clutch fluid reservoir plug using the tool.
ToolDescriptionFunctionValidity
2000001400PlugBrake-clutch fluid reservoir cap
1. Undo the connectors and disconnect the rigid pipes from the master cylinder to the ABS control unit, master cylinder side.- Open the clips for the pipes from the master cylinder to the brake-clutch fluid reservoir.2. Undo the nuts fixing the master cylinder to the brake servo.
1. Move the master cylinder (1a) away from the brake servo and, using the tool, disconnect the pipes (1b) from the master cylinder to the brake-clutch fluid reservoir.
ToolDescriptionFunctionValidity
1823015000KnifeRetainer removal
Refitting ( Removing ) - Connect the pipes from the master cylinder to the brake-clutch fluid reservoir.- Place the master cylinder in its housing and secure it to the brake servo by tightening the nuts.- Connect and tighten the connectors for the rigid pipes from the master cylinder to the ABS control unit, master cylinder side.
ComponentFasteningdia  Value (daNm)Validity
Brake pipe connectorsConnectorM10/M121.4 ÷ 1.8
- Close the clips for the pipes from the master cylinder to the brake-clutch fluid reservoir.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR