7050D37 RIGHT REAR SEAT BACKREST COVER (SINGLE) - R.R. WITH BACKREST REMOVED - Alfa - 159 - eLearn

939004848 - 7050D37 RIGHT REAR SEAT BACKREST COVER (SINGLE) - R.R. WITH BACKREST REMOVED

) Op. 7050B12 REAR SEAT HEAD RESTRAINT - R.R. Op. 7050B08 GUIDE BUSH FOR HEAD RESTRAINT (ONE) FOR REAR SEAT - R.R 1. Remove the trim for the release lever, releasing the inner retainers.2. Undo the nut.3. Keep the attachment plate (3a), the washer (3b), the washer (3c), the spring (3d) and the trim (3e).4. Remove the surround.

1. Release the trim (1c) retaining profiles (1b) along the entire perimeter (1a).2. Remove the rear trim.3. Release the cover from the upholstery along the entire perimeter of the backrest.

1. If necessary, fold the cover and upholstery over and cut all the backrest front retainers using cutters.2. Separate the backrest trim (2a) from the padding (2b).

Refitting ( Removing

) - Check that the backrest trim is not damaged.- If separated, position the backrest trim on the padding and crimp the retainers using special pliers.

Mould the cover on the upholstery during the various refitting stages.

- Fit the trim on the padding along the entire perimeter of the backrest.- Position the rear cover.- Attach the cover retaining profiles along the entire perimeter.1. Refit the trim (1a), the spring (1b), the washer (1c), the washer (1d), the attachment plate (1e) and tighten the nut (1f) to the end of travel position.

Position the attachment plate (1e) as illustrated in the diagram.

2. Fit the trim for the release lever in position and attach the inner retainers.3. Refit the surround.

Op. 7050B08 GUIDE BUSH FOR HEAD RESTRAINT (ONE) FOR REAR SEAT - R.R Op. 7050B12 REAR SEAT HEAD RESTRAINT - R.R.