939010801 - 3330D02 BRAKE SERVO/BRAKE PUMP ASSEMBLY - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.     Op. 3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE     Op. 7040A26 STEERING COLUMN TRIM - R+R     Op. 7040A44 LEFT DASHBOARD SIDE TRIM - R.R.    Op. 5580C23 DRIVE SIDE KNEE PROTECTION AIR BAG MODULE R. R.1. Remove the retaining clip (1a), release the return spring (1b) and extract the pin (1c) connecting the brake servo to the brake pedal. 1. Disconnect the connectors (1a) from the brake pump and the single-acting valve (1b) from the brake servo. 1. Undo the bolts (1a) and remove the brake servo (1b) complete with brake pump. Refitting ( Removing ) - Place the brake servo complete with brake pump in position and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake servo	Bolt	M8	(pedal assembly side) 2.2 - 2.6

- Connect the single-acting valve to the brake servo.- Connect the pipes to the brake pump and tighten the connectors to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10/M12	1.4 ÷ 1.8

- Place the pin connecting the brake servo to the brake pedal in its housing, connect the return spring and fit the retaining clip.     Op. 5580C23 DRIVE SIDE KNEE PROTECTION AIR BAG MODULE R. R.    Op. 7040A44 LEFT DASHBOARD SIDE TRIM - R.R.    Op. 7040A26 STEERING COLUMN TRIM - R+R     Op. 3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE     Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR