939011269 - 7040L18 PASSENGER COMPARTMENT FLOOR REAR CARPET - R.R.

Removing ( Refitting ) Remove both the front seats.    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.     Op. 7040L71 BOX ON TUNNEL REAR COATING - R R    Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R     Op. 7040L20 TUNNEL COVER - R.R     Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.     Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R 1. Release the rear carpet retaining buttons using the special tool.

Tool	Description	Function	Validity
1823015000	Knife	Retainer removal

2. Undo the nuts (2a) and move the supports (2b) for the seat electrical connections.3. Remove the rear carpet. Refitting ( Removing ) - Check that the rear carpet is not damaged.- Position the rear carpet.- Place the supports for the seat electrical connections in position and tighten the nuts.- Attach the rear carpet retaining buttons.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R     Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.     Op. 7040L20 TUNNEL COVER - R.R     Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R     Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 7040L71 BOX ON TUNNEL REAR COATING - R R    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.