3025532 - 5530A82 LEAD BETWEEN STARTER MOTOR AND ALTERNATOR - R.R.

Removing ( Refitting )  - 5530B10  battery - r+r - 1048A34  sleeve(s) from flow meter to air supply capacity case - r + r - 1056B87  ignition/injection system control unit mount - r r - 1056B17  throttle body intergral with dvl - r r - 5530B26  lead between battery and starter motor - r+rRaise the vehicle.1. Working underneath the engine, open the cover for the alternator connection.2. Undo the nut.3. Remove the electrical connection.

	Name	Connector
3	Alternator	A10B

Lower the vehicle.4. Working via the engine compartment, disconnect the cable retaining band.5. Recover the cable. Refitting ( Removing ) Check that the cable between the starter motor and the alternator is not damaged and that the individual conductors are correctly secured to the connections.If necessary, check the continuity.Position the cable.Connect the cable retaining band.Raise the vehicle.Position the electrical connection on the alternator and tighten the nut.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ALTERNATOR LEAD	M8	1.1

Close the alternator connection cover.Lower the vehicle. - 5530B26  lead between battery and starter motor - r+r - 1056B17  throttle body intergral with dvl - r r - 1056B87  ignition/injection system control unit mount - r r - 1048A34  sleeve(s) from flow meter to air supply capacity case - r + r - 5530B10  battery - r+r