3025779 - 7030B70 sun-roof control switch - r+r

Removing ( Refitting )  - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after checking electrical circuit1. Disconnect the electrical connection between the motor and control unit.

NameConnector
1Sunroof connection  D45 
2. Undo the bolts securing the motor to the control unit.3. Release the motor's toothed wheel (3a) from the slide cables (3b), making sure not to allow the cables to slide. (If the cables slide but not simultaneously, this could cause the slides to go out of alignment, resulting in a malfunction of the sun roof).4. Remove the motor with control unit.
Refitting ( Removing ) Check that the motor with control unit is not damaged.1. Position the motor with control unit (1a) and engage the motor's toothed wheel (1b) on the slide cables (1c), making sure not to allow the cables to slide. (If the cables slide but not simultaneously, this could cause the slides to go out of alignment, resulting in a malfunction of the sun roof). 2. Secure the motor with control unit with the bolts.3. Connect the electrical connection
 - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after checking electrical circuitCheck the operation of the sunroof.If necessary, reprogramme the control unit:  See assembly 7030B   sliding roof .