939010388 - 0510A20 TIMING GEAR WITH BELT DRIVE - CHECK - CARRY OUT OPERATION WITH CAM COVER(S) REMOVED AND TAPPETS ADJUSTED AND CRANKSHAFT PULLEY DETACHED (IF NECESSARY)

In order to carry out the timing check, the crankshaft timing template must be fitted after the registration marks on the driven toothed pulley and the tappet cover have been aligned as shown below.For the preliminary operations refer to    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT
Camshaft timing1. Turn the crankshaft until reference (1a) stamped on the timing system toothed driven pulley is aligned with reference (1b) on the tappet cover.
Crankshaft timing1. Undo the bolt fixing the crankcase front cover shown in the diagram.2. Fit the tool and fasten it using the calibrated screw.
ToolDescriptionFunctionValidity
2000003000TemplateEngine tuning1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V