939011111 - 7005A10 FRONT SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY

Check that the rear door is aligned, otherwise:    Op. 7010A10 REAR SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY Open the front door.1. Check that the door seal is not damaged along its perimeter, otherwise replace.2. Check that the upper reference (2a) coincides with the middle of angle (2b) and that joint (2c) coincides with the water drain groove (2d). Otherwise prise the seal out of the perimeter housing and refit, observing the markings.3. If necessary, align bolts (3a) and move lock striker (3b) to the correct position using the slotted bolt holes. The arrows indicate the possible movements for the adjustment.Tighten the bolts (3a) to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
DOOR LOCK STRIKER	Bolt	M8x20	2.2÷ 2.6

- Check that the stiker and the door lock are correctly matched and that the alignment is correct with the door closed.