ALFA 159 1.9 JTD 16V ELECTRICAL EQUIPMENT 70 FITTINGS 7005 PASSENGER COMPARTMENT FRONT SIDE DOORS 7005D FRONT DOOR WINDOW GLASSES 7005D15 FRONT SIDE DOOR DESCENDING WINDOW GLASS (ONE) LEFT OR RIGHT - R.R
939011128 - 7005D15 FRONT SIDE DOOR DESCENDING WINDOW GLASS (ONE) LEFT OR RIGHT - R.R
Removing
(
Refitting
)
Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R. Op. 7005E38 FRONT SIDE DOOR INTERIOR HANDLE- R.R. Op. 7040E24 LOWER COURTESY LIGHT IN DOOR PANEL - R+R Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R. Op. 7005D30 FRONT SIDE DESCENDING WINDOW GLASS SCRAPER (INNER) (ONE), LEFT OR RIGHT - R.R. 1. Open the access covers to the window retaining terminals. 2. Provisionally connect the window switch unit to connection (2a), then move the window until the glass retaining terminals (2b) are in an accessible position (as in the figure). If the window motor (2c) is faulty, remove and then move the window by inserting a tool in the groove left free by the motor. 3. Loosen bolts (3a) of terminals (2b).
1. Proceeding with car, lift the glass by hand (first raise from the rear) and remove from the outside of the door frame.
Refitting
(
Removing
)
- Check the condition of the glass, retaining terminals and slide channels. - Position the glass in its housing with care and lower until it is housed in the retaining terminals. - Ensure the glass is correctly fitted in the terminals, then push home in the rear slide channel. - Tighten the retaining terminal bolts. Component Fastening dia Value (daNm) Validity FRONT DOOR WINDOW Bolt M6x16 0.7 ÷ 1.1
- If removed, fit the window motor. - Close the access covers to the window retaining terminals. Provisionally connect the window switch unit to the connection, then move the window to monitor its operation. Op. 7005D30 FRONT SIDE DESCENDING WINDOW GLASS SCRAPER (INNER) (ONE), LEFT OR RIGHT - R.R. Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R. Op. 7040E24 LOWER COURTESY LIGHT IN DOOR PANEL - R+R Op. 7005E38 FRONT SIDE DOOR INTERIOR HANDLE- R.R. Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R. - Check that the dismantled parts are working.
Removing
(
Refitting
)
Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R. Op. 7005E38 FRONT SIDE DOOR INTERIOR HANDLE- R.R. Op. 7040E24 LOWER COURTESY LIGHT IN DOOR PANEL - R+R Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R. Op. 7005D30 FRONT SIDE DESCENDING WINDOW GLASS SCRAPER (INNER) (ONE), LEFT OR RIGHT - R.R. 1. Open the access covers to the window retaining terminals.2. Provisionally connect the window switch unit to connection (2a), then move the window until the glass retaining terminals (2b) are in an accessible position (as in the figure).If the window motor (2c) is faulty, remove and then move the window by inserting a tool in the groove left free by the motor.3. Loosen bolts (3a) of terminals (2b).
