939010373 - 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY
- Check that the brake/clutch fluid in the reservoir is at the maximum level; if this is not the case, top up using the recommended fluid.- When topping up the brake/clutch fluid, remove the reservoir cap and top up until the maximum level is reached.| Component | Type | Description | Classification | Qty. | Validity | 
|---|---|---|---|---|---|
| BRAKE-CLUTCH HYDRAULIC SYSTEM | Fluid [kg] | TUTELA TOP 4 | FMVSS n° 116 - DOT 4 - ISO 4925 - SAE J-1704 - CUNA NC 956-01 | 0.50 | 
|  | The fluid in the reservoir should not exceed the MAX notch. | 
|  | The symbol on the resevoir identifies synthetic type brake/clutch fluids, distinguishing them from mineral type fluids. Using mineral-based fluids irreparably damages the special rubber gaskets on the braking system. | 
|  | Take great care to prevent the brake/clutch fluid, which is extremely corrosive, from coming into contact with the paintwork. If this does happen, was immediately with water. | 
|  | Brake fluid is poisonous and highly corrosive. In the event of accidental contact, immediately wash the affected parts with water and neutral soap. Then rinse thoroughly. Consult a doctor immediate if you swallow the fluid. |