939010409 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE
Removing
(
Refitting
)
Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R Op. 1016A10 SOUND-PROOFING COVER - R.R - Position a hydraulic jack under the engine crankcase sump.1. Undo the bolts (1a) and (1b) and remove the flexible mounting for the timing side power unit front support (1c).
Refitting
(
Removing
)
1. Place the timing power unit front support flexible mounting (1a) in its housing and secure it tightening the new bolts (1b), bolts (1c) and the new bolts (1d) to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Bolt (to be replaced) | M12 | (bodyshell side) 6.3 - 7.7 + 90° |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Bolt | M10 | (bodyshell side) 5.4 - 6.6 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Bolt (to be replaced) | M12 | (rigid support side) 6.3 - 7.7 + 90° |
