939004920 - 5540B45 GAS DISCHARGE DIPPED/MAIN BEAM HEADLAMP BULB - R.R.

Removing ( Refitting ) 1. Remove the cover (bayonet mount).2. Release the bulb retaining clips.
1. Extract the bulb from the bulb holder.
If the bulb is working properly, do not touch it with your hands. If this happens, clean the bulb with alcohol.
2. Disconnect the electrical connection for the bulb.
Refitting ( Removing ) - Check the condition of the bulb and make sure that it is clean.
Do not touch the bulb with your hands. If this happens, clean the bulb with alcohol
- Connect the electrical connection for the bulb.1. Position bulb (1a) in its seat and position the electrical wiring (1b) as shown in the figure.2. Do up the bulb retaining clips.
- Refit the cover (bayonet mount).- Close the bonnet.- Check that the bulb is working.