939010566 - 1060G20 ENGINE RPM SENSOR - R.R.

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Disconnect the electrical connection from the engine rpm sensor.

	Description	Connector
1	Engine rpm sensor	See K046 RPM SENSOR

2. Undo the bolt (2a) and remove the rpm sensor (2b). Refitting ( Removing ) 1. Position the engine rpm sensor (1a) in its housing and secure it tightening the bolt (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rpm sensor	Bolt	M6	(engine block side) 0.6 - 1.0	1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V

2. Connect the electrical connection for the engine rpm sensor.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Connect the negative battery terminal.