The side lights activated signal is sent to pin 28 of connector
B of the Body Computer
M1
from the steering column switch
unit
H5
.
The 'key in ON' signal (INT) for the switch
H1
reaches the underdashboard control unit
B2
, at pin 11 of
connector H and from there goes to the Body Computer
M1
(pin 9 of connector F).
The 'key in PARK' signal (POS) for the switch
H1 reaches the underdashboard control unit
B2
, at pin 2
of connector H and from there goes to the Body Computer
M1
(pin 12 of connector F).
The Body Computer
M1
controls the
supply for the front side lights
F10
(left) and
F11
(right)
- from pins 30 and 40 of connector A, the rear side lights
F30
(left)
F31
(right) and the no. plate lights
F50
and
F51
from pins 5, 6, 9 and 38 of connector E.
The Body Computer M1 is connected via the
CAN line to the instrument panel E50 to manage the 'side lights
on' warning light and, if a failure is detected in the circuit,
the 'lights failure' warning light.