939003621 - J040 REAR VIEW MIRROR ELECTRICAL ADJUSTMENT DOES NOT WORK

The exterior mirrors do not move when the control is operated.

The left mirror is adjusted by the Driver''s Door Node using information from the joystick on the door handle, the right mirror is aadjusted by the Passenger Door Node using information from the joystick on the driver''s door hand. The information from the joystick is sent from the Driver''s Door Node to the Passenger Door Node.

1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment to the diagnostic connect and check the following at the Driver''s Door Node:In errors ambient that there are no faults In parameters ambient the plausibility of the parameters for joystick (left/right/up/down).	Move on to Step 3	1. Presence of faults	1. Continue following the instructions for the diagnostic equipment.
			2. Mirror selector joystick parameters (left/right/up/down) not plausible.	2. Move on to Step 2.
2	MIRROR ADJUSTMENT JOYSTICK OPERATION CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Remove the control panel following the,Op. 7005R40 REAR VIEW MIRROR-S AND DOOR MIRROR-S POSITIONING SWITCH UNIT - R.R.on the driver''s door side disconnect the connector and check the operation of the joystick following theOp. 7005RA CHECK ON OPERATION OF DOOR MIRROS ADJUSTMENT/FOLDING	Move on to Step 3	Mirror control joystick faulty	Replace the external mirrors control joystickOp. 7005R40 REAR VIEW MIRROR-S AND DOOR MIRROR-S POSITIONING SWITCH UNIT - R.R.
3	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present.	End of diagnosis	The adjustment fault persists.	Replace the Driver''s Door Node    Op. 5505A42 CONTROL UNIT (DIGITAL NETWORK NODE) IN DRIVER'S DOOR - R.R.