939003681 - K143 ONE WARNING LIGHT ACTIVATED BY STEERING COLUMN SWITCH UNIT NOT WORKING

When the lights are activated using the stalk, the relevant warning light does not light up on the instrument panel N.B: The warning lights activated when the stalk is operated are:

• Side lights/number plate lights
• Main beam headlamps
• Direction indicators

0	PRELIMINARY CHECKS	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	With the key ON, operate all the lights from the stalk, i.e.: Using the wheel, side lights/number plate lights With the stalk, high beams (both fixed and flashing positions) With the stalk, turn signals (right and left) and check they are activated	Move on to Step 1	1.The side lights do not operate	1. Continue as instructed in theSee table I001
			2. The high beams do not work	2. Continue as instructed in theSee table I006 MAIN BEAM HEADLAMPS NOT WORKING
			3. The turn signals do not operate from both sides	3. Continue as instructed in theSee table I010
			4. The turn signals do not operate on one side only	4. Continue as instructed in theSee table I012 LEFT OR RIGHT DIRECTION INDICATORS NOT WORKING
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment and check the operation of the warning lights in question on the INSTRUMENT PANEL NODE by means of active diagnosis	Move on to Step 2	The warning lights do not come on	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
2	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present	End of diagnosis