939003686 - K158 GENERAL FAILURE WARNING LIGHT NOT WORKING
Even if one of the functions signalled by the general failure warning light is faulty, the warning light in the instrument panel does not come on N.B: The following functions cause the activation of the general failure warning light:- Inertia switch (FIS) operation
- Speed limit exceeded
- Diesel filter sensor failure (JTD only)
- Engine oil pressure sensor failure
- Rain sensor failure (if fitted)
- Parking sensor failure (if fitted)
- Dusk sensor failure (if fitted)
- Window anti-crush safety system failure (HIGH version only)
- Speedometer signal failure
- Tyre inflation pressure sensor failure
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
| Connect the diagnostic equipment and check the operation of the general failure warning light in active diagnosis at the INSTRUMENT PANEL NODE | End of diagnosis | The warning light is not activated | Replace instrument panel Op. 5560B10 CONTROL PANEL - R+R |