939005140 - Y006 P0110 - DEBIMETER AIR TEMPERATURE SIGNAL

The diagnostic equipment signals: Error P0110 (Air flow meter temperature signal)
This error is detected if the junction unit inlet voltage (Pin 53) is greater than 4.95 V (positive short circuit) (detail "Beyond the upper limit" or less than 0.05 V (short circuit to earth or break in the circuit) (detail "Below the lower limit"). In this case the junction unit replacement value is 40 °C.
1SUPERCHARGING TEMPERATURE SENSOR CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the supercharging temperature sensor is working properly, following the instructions in the    See Test 1064BD SUPERCHARGING TEMPERATURE CHECKEnd of diagnosis