939005149 - Y017 P0122 - ACCELERATOR PEDAL CONNECTOR

The diagnostic equipment signals: Error P0191 (Fuel pressure signal)

This error is detected if there is interference with the signal for the sensor at Pin 43 of the electronic control module.

0	PRELIMINARY CHECKS	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment and select the Bosch EDC 16C39 electronic control unit, checking that none of the following errors are present:P0641 - Sensor power supply 1P0651 - Sensor power supply 2	Move on to Step 1	1. Error P0641 present	1. Proceed as instructed in the    See Test 1060GM CHECK ENGINE CONTROL UNIT CONNECTIONS
			2. Error P0651 present	2. Proceed as instructed in the    See Test 1060GN CHECK ENGINE CONTROL UNIT CONNECTIONS
1	ACCELERATOR PEDAL CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the accelerator pedal is working properly, carrying out the    See Test 1068AC ACCELERATOR PEDAL CHECKS	End of diagnosis