939005250 - 1020A26 CRANKCASE SUMP - R.R CLEAN MATING SURFACES AND APPLY SEALANT FOR VEHICLES WITH AIR CONDITIONING

Removing ( Refitting )     Op. 4450B12 FRONT WHEELS (TWO) - R+R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 4410D10 FRONT SUSPENSION FRAME - R+R     Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE 1. Undo the front and rear bolts (1b) fixing the crankcase sump using the spanner (1b).
ToolDescriptionFunctionValidity
1860834000SpannerLoosen/ tighten front and rear crankcase sump bolts2.4 JTD 20V
2. Undo the gearbox side bolts (2a) fixing the crankcase sump using the spanner (2b).
ToolDescriptionFunctionValidity
1860833000SpannerLoosen/ tighten the bolts securing the crankcase sump, timing side and gearbox side 1.9 JTD 8V2.4 JTD 20V
3. Use an adjustable spanner wrench to unscrew the timing end side bolts.4. Cut the sealant using the special tool and lower the oil sump as far as possible.
ToolDescriptionFunctionValidity
1870718000BladeCut the crankcase sump sealant
5. Undo the bolts and the nut fixing the engine oil intake.6. Remove the crankcase sump together with the engine oil intake.
Refitting ( Removing ) - Clean the matching surfaces between the crankcase sump and the cylinder block/crankcase.- Apply silicone sealant to the oil sump side and rear surfaces.
Apply a continuous bead of sealant with no breaks.
- Position the crankcase sump in its housing together with the intake with no axial deviation.- Tighten the bolts and the nut fixing the engine oil intake.- Apply silicone sealant to the oil sump front surface.
Apply a continuous bead of sealant with no breaks.
- Tighten the side bolts securing the crankcase sump to the recommended torque using the wrench (to be used for the gearbox side bolts only).
ComponentFasteningdia  Value (daNm)Validity
Engine oil sumpSide boltsM60.92.4 JTD 20V
ToolDescriptionFunctionValidity
1860833000SpannerLoosen/ tighten the bolts securing the crankcase sump, timing side and gearbox side 1.9 JTD 8V2.4 JTD 20V
- Tighten the front and rear bolts fixing the crankcase sump to the recommended torque using the wrench.
ComponentFasteningdia  Value (daNm)Validity
Engine oil sumpFront and rear boltsM82.52.4 JTD 20V
ToolDescriptionFunctionValidity
1860834000SpannerLoosen/ tighten front and rear crankcase sump bolts2.4 JTD 20V
    Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 4410D10 FRONT SUSPENSION FRAME - R+R     Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4450B12 FRONT WHEELS (TWO) - R+R     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE