| | Test results |
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Connect the diagnostic equipment (Examiner Plus or Smart) and check that there are no faults in the system | End of diagnosis | There are faults present | Move on to Step 2 |
| 2 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Using the diagnostic equipment carryout the active diagnosis of the LED activation | End of diagnosis | The LED is not activated | Move on to Step 3 |
| 3 | CHECK THE WIRING | All OK | Problems encountered | Operation |
|---|
| Check the continuity and insulation of the wiring between the Body Computer and the door panelCheck that the supply for the LED leaves the Body Computer and that the LED comes on See E7015 ALARM | End of diagnosis | The supply for the LED does not leave the Body Computer | Replace Body Computer Op. 5505A32 BODY COMPUTER - R.R |
| The supply is sent from the Body Computer but the LED does not light up | Replace the LED. |
