939010593 - 1072B60 THROTTLE SHAFT CONTROL VALVE FOR INLET PORTS R R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1060G70 VACUUM RESEVOIR - R.R     Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R 1. Disconnect the electrical connection of the intake duct throttle shaft control valve.

	Description	Connector
1	Flow modifier solenoid valve	See L064 FLOW MODIFYING SOLENOID VALVE

2. Disconnect the linkage of the intake duct throttle shaft control valve.3. Unscrew nuts (3a) and remove the intake duct throttle shaft control valve (3b). Refitting ( Removing ) 1. Refit the intake duct throttle shaft control valve (1a) and secure by tightening nuts (1b) to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Throttle carrier shaft control valve for inlet ducts	Nut	M		1.9 JTD 16V2.4 JTD 20V

2. Connect the linkage of the intake duct throttle shaft control valve.3. Connect the electrical connection of the intake duct throttle shaft control valve.     Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R     Op. 1060G70 VACUUM RESEVOIR - R.R     Op. 1016A10 SOUND-PROOFING COVER - R.R - Connect the negative battery terminal.