939010637 - 1080C83 EXHAUST GAS INLET PIPING FROM EXHAUST MANIFOLD TO HEAT EXCHANGER EGR - R R

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R     Op. 1048A51 TURBOCHARGER RIGID AIR INLET HOSE - R.R.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.  Op.   1. Loosen the bolts (1a), loosen the collar (1b) and remove the the pipe (1c).- Remove the gaskets. - Place the pipe in its housing complete with new gaskets, tighten the bolts to the recommended torque and the collar connected to the E.G.R. heat exchanger.

Component	Fastening	dia	Value (daNm)	Validity
Exhaust gas/water heat exchanger for E.G.R. system	Bolt	M8	(exhaust manifold side) 2.3 - 2.8	1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V

 Op.       Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1048A51 TURBOCHARGER RIGID AIR INLET HOSE - R.R.    Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R     Op. 1016A10 SOUND-PROOFING COVER - R.R