939010645 - 1084A22 ENGINE OIL FILLER - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the rapid connector for the vacuum intake pipe from the vacuum pump.2. Loosen the band and disconnect the oil vapour recovery pipe from the engine oil filler. 1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Description	Connector
1	Engine coolant temperature sensor/sender unit	See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT

2. Undo the bolts (2a) and remove the engine oil filler (2b).3. Remove the gasket. Refitting ( Removing ) - Place the gasket back in its housing.- Place the engine oil filler fitting in its housing and secure it by tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Engine oil filler	Bolt	M6	(cylinder head extension side) 0.8 - 1.0	1.9 JTD 16V2.4 JTD 20V

- Connect the electrical connection to the engine coolant temperature sensor.- Connectt the oil vapour recovery pipe to the engine oil filler fitting and tighten the band.- Connect the vacuum pipe rapid connector to the vacuum pump.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 5530B10 BATTERY - R+R