939010733 - 2110D26 DIFFERENTIAL INNER CASE BEARINGS - REPLACE WITH DIFFERENTIAL INNER CASE REMOVED

Removing ( Refitting ) Position the differential internal housing in a vice fitted with protective jaws.1. Remove front bearing (1a) using USAG 472/3 extractor (1b) or similar tool and reaction bar (1c).
DescriptionCodeFunction
1cReaction bar1.870.710.000Front differential bearing removal
1. Undo bolts (1a) securing the differential ring gear with the upper casing half (1b) and separate frm the lower casing half.2. Use a press to separate the differential ring gear from upper differential casing half pinion (2a) using plate (2b) and reaction bar (2c).
During this operation, support the differential from below.
DescriptionCodeFunction
2bHalf plate1.860.837.000Differential ring gear separation
DescriptionCodeFunction
2cReaction bar1.870.710.000Differential ring gear extraction
1. Remove front bearing (1a) using USAG 472/3 extractor (1b) or similar tool and reaction bar (1c).
DescriptionCodeFunction
1cReaction bar1.870.710.000Extracting rear differential bearing
Refitting ( Removing ) 1. Fit the rear bearing (1a) to the upper differential casing half using a hydraulic press, plates (1b) and the fitting tool (1c).
DescriptionCodeFunction
1bHalf plate1.860.837.000Fitting rear differential bearing
DescriptionCodeFunction
1cExtractor/Fitting tool1.870.658.000Fitting rear differential bearing
Insert the differential ring gear to the upper differential casing half with the aid of a rubber mallet and taking care to align the retaining bolt holes.Join the differential casing half with the differential ring gear and tighten the bolts to the specified torque.
Value daNmFasteningComponentØ  
.6+90°BoltMANUAL GEARBOX DIFFERENTIAL RING GEAR BOLTSM10X1.25
1. Fit the rear bearing (1a) to the upper differential casing half pinion using a hydraulic press, plates (1b) and the fitting tool (1c).
DescriptionCodeFunction
1bHalf plate1.860.837.000Fitting differential front bearing
DescriptionCodeFunction
1cExtractor/Fitting tool1.870.658.000Fitting differential front bearing