3310A60 FRONT BRAKE PADS - REPLACE - Alfa - 159 - eLearn

939010762 - 3310A60 FRONT BRAKE PADS - REPLACE

) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-). Op. 4450B12 FRONT WHEELS (TWO) - R+R 1. Disconnect the electrical connection for the brake pad wear cable.

	Description	Connector
1	Left brake pad wear sensor (switch)	See K020 LEFT BRAKE PAD WEAR SENSOR (SWITCH)

There is no brake pad wear sensor on the right front brake caliper.

2. Take out the pins (2a) and remove the clip (2b).

1. Remove the front brake pads.

Refitting ( Removing

) - Compress the pistons for the front brake calipers.

The level of the brake fluid in the reservoir will increase; if necessary, draw off any excess fluid using a suitable tool.

- Place the front brake pads in their housings.- Fit the clip in position and secure it using the pins.- Connect the electrical connection for the brake pad wear cable. Op. 4450B12 FRONT WHEELS (TWO) - R+R - Connect the negative battery terminal.- Remove the vehicle from the lift.