939010375 - 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR

- Remove the brake/clutch fluid reservoir cap and connect suitable equipment to the reservoir.- Remove the protective plug and connect the bleed recovery device (pipe and reservoir) to the clutch hydraulic actuator.- Open the bleed valve on the clutch hydraulic actuator.- Open the fluid reservoir tap slowly.- Wait for all the air in the clutch release hydraulic system to escape completely.- Close the bleed valve on the clutch slave cylinder and refit the protective cap in its seat.- Remove the collection device.- Remove the bleed equipment.- Check that the cluch disengages and that the gears engage properly.- Check the fluid level in the brake-clutch reservoir is correct.