939010380 - 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE
|Follow the safety instructions Op. 5040 AIR CONDITIONING CASING AND COMPONENTS|
- Let the engine run with the air conditioning on for 10 - 15 minutes.1. Undo the repressurizing valve caps.2. Before fitting the connectors on the needle valves, move the knurled ring nut upwards.3. Connect the high pressure connecting pipe (HIGH) to the corresponding rapid attachment valve.4. Connect the low pressure connecting pipe (LOW) to the corresponding rapid attachment valve.
|To improve safety the rapid connectors for the equipment connecting pipes have different diameters: the low pressure side is larger, whilst the high pressure side is smaller.|
- Start the procedure for draining the refrigerant fluid, following the instructions in the equipment manual.1. Whilst draining the system the compressor fluid that comes out collects in a special container.
|The fluid is extremely hygroscopic: avoid leaving the containers open.|
- Refill the system with exactly the same amount of fluid indicated on the container.
|AIR CONDITIONER ASSEMBLY COMPRESSOR (C.A.)||Oil [kg]||ZXL 100 PG||..........|
|AIR CONDITIONING CIRCUIT||Refrigerant fluid [kg]||R134a||0.550|
|Use filtered air to prevent the introduction of foreign bodies into the system.|
|If the system is WASHED the entire amount of compressor oil in the system will be removed.|
|AIR CONDITIONING CIRCUIT||Oil (cc)||ZXL 100PG||130|