939010556 - 1060F30 SINGLE FUEL MANIFOLD PIPE - R.R.

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
DescriptionConnector
-Battery    See A001 BATTERY
    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1060F20 PIPE FROM PRESSURE PUMP TO FUEL MANIFOLD - R.R.     Op. 1060F36 PIPES (ALL) FROM FUEL MANIFOLD TO INJECTOR - R.R. 1. Detach the electrical connection from the fuel pressure sensor.
DescriptionConnector
1Fuel pressure sensor    See K083 FUEL PRESSURE SENSOR
2. Detach the electrical connection from the fuel pressure regulator on the injector single manifold.
DescriptionConnector
2Fuel pressure regulator on rail    See N087 FUEL PRESSURE REGULATOR ON RAIL
3. Loosen the band and disconnect the fuel return pipe from the single fuel manifold pipe to the fuel return manifold, single fuel manifold pipe side.4. Undo bolts (4a) and remove single fuel manifold pipe (4b), complete with fuel pressure sensor and fuel pressure regulator.
Refitting ( Removing ) - Fit the single fuel manifold pipe complete with fuel pressure sensor and fuel pressure regulator and secure it by tightening the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Single fuel manifold pipe (rail)BoltM8(cylinder head extension side) 2.3 - 2.81.9 JTD 16V2.4 JTD 20V
- Connect the fuel return pipe from the single fuel manifold pipe to the fuel return manifold, single fuel manifold pipe side, and tighten the band.- Secure the electrical connection to the fuel pressure regulator on the injector single manifold.- Secure the electrical connection to the fuel pressure sensor.     Op. 1060F36 PIPES (ALL) FROM FUEL MANIFOLD TO INJECTOR - R.R.     Op. 1060F20 PIPE FROM PRESSURE PUMP TO FUEL MANIFOLD - R.R.     Op. 1016A10 SOUND-PROOFING COVER - R.R - Connect the negative battery terminal.