939010962 - 5505A13 ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R.

Removing ( Refitting ) - Open the bonnet.1. Undo the bolts (1a) and remove the cover (1b).
1. Disconnect the upper electrical connection.
DescriptionComponent
ENGINE COMPARTMENT JUNCTION UNIT    See B001 JUNCTION UNIT
2. Undo the control unit side retainers.3. Raise the control unit.4. Release the control unit rotating pins from the retainers.
1. Disconnect the lower electrical connections (1a, 1b, 1c, 1d) for the control unit.
DescriptionComponent
ENGINE COMPARTMENT JUNCTION UNIT    See B001 JUNCTION UNIT
2. Keep the control unit..
Refitting ( Removing ) - Check that the additional junction unit is not damaged.- Connect the lower electrical connections and position the control unit in its seat.- Do up the rotating pins and the control unit retainers.- Connect the upper electrical connection.- Close the cover and tighten the bolts.- Close the bonnet.- Test the operation of the electrical system.