3330B08 PEDAL MOUNT ASSEMBLY - R R AND OVERHAUL WITH FACIA TRIM SUPPORT BEAM REMOVED FOR RIGHT-HAND DRIVE VERSIONS - Alfa - 159 - eLearn

939005776 - 3330B08 PEDAL MOUNT ASSEMBLY - R R AND OVERHAUL WITH FACIA TRIM SUPPORT BEAM REMOVED FOR RIGHT-HAND DRIVE VERSIONS

) Op. 4110A29 MOUNT WITH STEERING SHAFTS - R R - INCLUDES STEERING WHEEL R R - FOR RIGHT-HAND SIDE VERSIONS Op. 1820B21 MASTER CYLINDER (PUMP) - R R FOR RIGHT HAND DRIVE VERSIONS 1. Unscrew the engine coolant reservoir fixing nuts and move it aside.2. Open the clutch system pipe retaining clips.

- Disconnect the electrical connection for the accelerator pedal.

	Description	Connector
-	Accelerator pedal potentiometer	See K055 ACCELERATOR PEDAL POTENTIOMETER

- Disconnect the electrical connection for the brake pedal.

	Description	Connector
-	Brake pedal switch	See I030 BRAKE PEDAL SWITCH

- Disconnect the electrical connection for the clutch pedal.

	Description	Connector
-	Clutch pedal switch	See I031 CLUTCH PEDAL SWITCH

1. Remove the retaining clip (1a) and move back pin (1b) connecting the brake pedal to the brake servo.

1. Using a suitable tool (drill) remove the rivets securing the clutch pipe connector flange to the pedal assembly.- Disconnect the bonnet opening cable from the lever.2. Undo the fixing nuts and remove the pedal assembly mounting.

Refitting ( Removing

) - Place the pedal assembly mounting in position and secure it tightening the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Pedal assembly	Nut	M8	(bodyshell side) 2.2 - 2.6

- Connect the bonnet opening cable to the lever.- Fasten the clutch pipe connector flange to the pedal mounting support using new rivets.- Connect the brake pedal to the brake servo using the pin and the retaining clip.- Connect the electrical connection for the clutch pedal.- Connect the electrical connection for the brake pedal.- Connect the electrical connection for the accelerator pedal.- Place the engine coolant supply reservoir back in its housing and secure it using the nuts.- Close the clutch system pipe retaining clips. Op. 1820B21 MASTER CYLINDER (PUMP) - R R FOR RIGHT HAND DRIVE VERSIONS Op. 4110A29 MOUNT WITH STEERING SHAFTS - R R - INCLUDES STEERING WHEEL R R - FOR RIGHT-HAND SIDE VERSIONS Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR