939005785 - 3340B53 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO ABS HYDRAULIC CONTROL UNIT - R.R. FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Replace the brake-clutch fluid reservoir plug using the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake-clutch fluid reservoir cap

- Unscrew the engine coolant reservoir fixing nuts and move it aside.

Mark the position of the connectors for the rigid pipes from the brake pump to the A.B.S. hydraulic control unit.

1. Undo the connectors (1a) for the rigid pipes (1b) from the brake pump.- Open the retaining clips for the rigid pipes from the brake pump to the A.B.S. hydraulic control unit. 1. Undo the connector (1a), open the retaining clips (1b) and remove the rigid pipe (1c) from the A.B.S. hydraulic control unit. Refitting ( Removing ) - Place the rigid pipe in position, close the retaining clips and tighten the connector connected to the A.B.S. control unit.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10/M12	1.4 ÷ 1.8

- Tighten the connectors for the rigid pipes from the A.B.S. control unit to the brake pump, brake pump side to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10/M12	1.4 ÷ 1.8

- Close the retaining clips for the rigid pipes from the brake pump to the A.B.S. hydraulic control unit.- Place the engine coolant supply reservoir back in its housing and secure it using the nuts.    Op. 5530B10 BATTERY - R+R     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR