1040A10 FUEL TANK - R + R AND DECANT FUEL - Alfa - 159 - eLearn

939010492 - 1040A10 FUEL TANK - R + R AND DECANT FUEL

) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. 1. Undo the bolts (1a) and remove the access cover (1b) for the submerged pump assembly complete with level gauge.2. Disconnect the electrical connection from the submerged pump assembly complete with level gauge.

	Description	Connector
2	Fuel pump and level gauge	See N040 FUEL PUMP AND LEVEL GAUGE

3. Disconnect the rapid connector for the fuel supply pipe, submerged pump assembly side complete with level gauge.

1. Disconnect the rapid connector for the breather pipe, fuel tank side.2. Disconnect the rapid connector for the fuel filler pipe, fuel tank side.

1. Disconnect the quick-release connectors for the fuel vapour recovery pipes.

1. Position a hydraulic jack with a suitable support under the fuel tank.2. Undo the bolts (2a) and remove the fuel tank support belts (2b).

1. Lower the hydraulic jack slowly and remove the fuel tank.

Refitting ( Removing

) - Place the fuel tank back in its housing using the hydraulic jack.- Place the fuel tank support belts back in their housings and secure them tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Fuel tank	Bolt	M8	(bodyshell side) 1.8 - 2.2

- Remove the hydraulic jack with a suitable support under the fuel tank.- Connect the quick-release connectors for the fuel vapour recovery pipes.- Connect the rapid connector for the fuel filler pipe, fuel tank side.- Connect the rapid connector for the breather pipe, fuel tank side.- Connect the rapid connector for the fuel supply pipe, submerged pump assembly side complete with level gauge.- Connect the electrical connection to the submerged pump assembly complete with level gauge.- Place the access cover to the submerged pump assembly complete with level gauge back in its housing and secure it using the bolts. Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. - Connect the negative battery terminal.- Remove the vehicle from the lift.