939010531 - 1056F50 COOLANT TEMPERATURE SENSO R R
Removing
(
Refitting
)
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).1. Disconnect the electrical connection from the engine coolant temperature sensor.2. Undo the engine coolant temperature sensor and remove it.
Refitting
(
Removing
)
- Place the engine coolant temperature sensor in its housing and tighten it to the recommended torque. | Replace the seal. |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine coolant temperature sensor | - | M12 | (thermostat unit side) 2.2 | 1.9 JTS2.2 JTS3.2 JTS |