939010630 - 1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 1048A34 SLEEVE(S) FROM FLOW METER TO AIR SUPPLY CAPACITY CASE - R + R     Op. 1056F17 THROTTLE BODY WITH DVL R R     Op. 1072B50 AIR CHAMBER - R.R.1. Loosen the band (1a) and remove the fuel vapour enablement solenoid valve to the intake (1b) after having disconnected it from the pipe and released it from the mounting bracket on the chamber. Refitting ( Removing ) - Refit the solenoid enabling the passage of fuel vapours to the intake, secure it to the mounting bracket, connect it to the pipe and tighten the band.    Op. 1072B50 AIR CHAMBER - R.R.    Op. 1056F17 THROTTLE BODY WITH DVL R R     Op. 1048A34 SLEEVE(S) FROM FLOW METER TO AIR SUPPLY CAPACITY CASE - R + R - Connect the negative battery terminal.