939010646 - 1084A40 ENGINE OIL LEVEL SENSOR - R + R
Removing
(
Refitting
)
Op. 1084A16 OIL DIPSTICK PIPE - R.R Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 1092C26 BELT FROM AIR CONDITIONER COMPRESSOR DRIVING POWER STEERING PUMP - R + R Op. 1092G10 SINGLE ENGINE BELT - R.R Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION 1. Remove the clip securing the oil level sensor connector to the sump.2. Undo the bolts (2a) and remove the engine oil level sensor (2b).
Refitting
(
Removing
)
- Place the engine oil level sensor in its housing and tighten the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine oil level sensor | Bolt | M12 | 0.8 ÷ 1.2 | 1.9 JTS2.2 JTS |