939010647 - 1084A42 ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

1. Disconnect the electrical connection for the engine oil pressure warning light switch.

	Description	Connector
1	Insufficient engine oil pressure sensor	See K030 LOW ENGINE OIL PRESSURE SENSOR (SWITCH)

2. Remove the engine oil pressure warning light switch. Refitting ( Removing ) - Replace the engine oil pressure warning light switch in its housing and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Switch for engine oil pressure warning light	-	M12	1.8	1.9 JTS2.2 JTS3.2 JTS

- Connect the electrical connection to the engine oil pressure warning light switch.- Connect the negative battery terminal.