1084B45 TIMING CHAIN LUBRICATION NOZZLE - R.R - Alfa - 159 - eLearn - 4CarData

939010649 - 1084B45 TIMING CHAIN LUBRICATION NOZZLE - R.R

Removing ( Refitting

) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE 1. Undo the bolt (1a) and remove the timing chain lubrication nozzle (1b).

Refitting ( Removing

) - Position the timing chain lubrication nozzle in its housing and secure it tightening the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing chain lubrication jet	Bolt	M	(engine block side) 1.0	1.9 JTS2.2 JTS

Op. 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R - Connect the negative battery terminal. Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY - Remove the vehicle from the lift.