1088E10 RADIATOR COOLING FAN - R + R - Alfa - 159 - eLearn

939010692 - 1088E10 RADIATOR COOLING FAN - R + R

) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

1. Undo the bolt (1a) and move the impact sensor (1b) to the side.

1. Disconnect the electrical connection from the radiator cooling fan.

	Description	Connector
1	Engine fan motor	See N011 FAN MOTOR

1. Undo the right nut securing the radiator cooling fan.

1. Undo the left nut securing the radiator cooling fan.2. Disconnect the electrical connections for the engine cooling fan resistor.

	Description	Connector
2	Engine fan adjustment resistance	See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1

1. Remove the radiator cooling fan releasing it upwards.

1. At the bench, undo the nuts (1a) and separate the fan motor (1b) from the duct (1c).

Refitting ( Removing

) - Fit the fan motor on the duct and secure it using the nuts.- Refit the radiator cooling fan and secure it using the nuts.- Connect the electrical connections to the engine cooling fan resistor.- Position the impact sensor in its housing and secure it using the bolt.- Connect the negative battery terminal.