939010699 - 1092B92 WATER PUMP /BALANCING SHAFT DRIVE CHAIN HYDRAULIC TENSIONER R R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R     Op. 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE 1. Unscrew the bolts (1a) and remove the water pump/balancer shaft drive chain hydraulic tensioner. Refitting ( Removing ) 1. Fit a suitable pin (diameter 1.5 mm) to secure the water pump/balance shaft drive chain hydraulic tensioner.

Press the tensioner piston and turn to the right to fit the tool.

2. Refit the water pump/balancer shaft drive chain hydraulic tensioner (2a) and secure by tightening bolts (2b) to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Water pump/balancing shafts drive chain hydraulic tensioner	Bolt	M6	(engine block side) 0.7 - 0.9	1.9 JTS2.2 JTS

- Remove the pin locking the counter-rotating shaft and water pump drive chain tensioner.     Op. 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE     Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R - Remove the vehicle from the lift.