939010991 - 5510C48 TIMING SIDE KNOCK SENSOR - R+R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

1. Disconnect the electrical connection (1a) and undo and remove the detonation sensor (1b).

	Description	Connector
1a	Detonation sensor - 2	See K050 DETONATION SENSOR

Refitting ( Removing ) - Place the detonation sensor back in its housing, connect the connection and tighten the bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Detonation sensor	Bolt	M10	1.6 ÷ 2.0	1.9 JTS2.2 JTS

- Connect the negative battery terminal.