939004926 - 5540C48 CONNECTING ROD FOR REAR SENSOR FOR CORRECTING/ALIGNING GAS DISCHARGE LIGHTING UNITS - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Raise the vehicle.1. Undo rod connection nuts (1a) and (1b).2. Remove the connecting rod.3. If necessary, unscrew nuts (3a) and remove rod (3b) from the antiroll bar. Refitting ( Removing ) - Check that the rod is not damaged.- If removed, position the rod mount on the anti-roll bar.- Fit the rod in the housing.- Tighten the rod connection nuts.- Remove the vehicle from the lift.

Reset the position of the headlamps using an Examiner or another diagnostic instrument.