939005269 - 1056F56 RIGHT CYLINDER HEAD INTAKE OR EXHAUST CAM ANGLE SENSOR - R.R.

Removing ( Refitting )

The procedure for the inlet side sensor is described below, carry out the same operations for the exhaust side sensor.

    Op. 1048A63 HOSE CONNECTING RESONATOR, FLOW METER AND THROTTLE BODY - R.R.1. Disconnect the electrical connection for the cam angle sensor, inlet side.

	Description	Connector
1	Inlet side timing sensor - right head	See K191 RIGHT HEAD INLET SIDE TIMING SENSOR

2. Undo the bolt (2a) and remove the cam angle sensor (2b), inlet side. Refitting ( Removing ) - Lubricate the cam angle sensor O-ring with engine oil.- Position the cam angle sensor, inlet side in its housing and secure it using the bolt.- Connect the electrical connection for the cam angle sensor, inlet side.    Op. 1048A63 HOSE CONNECTING RESONATOR, FLOW METER AND THROTTLE BODY - R.R.