939010951 - 5050B16 WINDSCREEN WASHER JETS LOWER PIPE - R. R.

Removing ( Refitting ) - Position the vehicle on a lift.- Raise the vehicle.1. Undo the front bolts fixing the left front wheel arch.2. Move the wheel arch slightly.3. Disconnect the windscreen washer supply pipe (3a) from the pump (3b).4. Fit a sensor in the end of the pipe (3b) to be used for reinserting the pipe during the refitting stage. - Lower the vehicle.    Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R     Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR     Op. 7210E22 R.R. WINDSCREEN BASE TRIM 1. Release the duct seal from the bonnet.2. Disconnect the pipe (2a) from the connector (2b).3. Remove the cover after having released the retainers.4. Release the pipe retainers.5. Extract the pipe leaving the sensor in its place. Refitting ( Removing ) - Check that the pipe is not damaged.- Refit the pipe with the help of the sensor.- Attach the pipe retainers.- Position the cover and attach the retainers.- Connect the pipe to the connector.- Attach the duct seal to the bonnet.    Op. 7210E22 R.R. WINDSCREEN BASE TRIM     Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R     Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR - Raise the vehicle.- Remove the sensor.- Connect the windscreen washer supply pipe to the pump.- Place the wheel arch in position and fit it.- Tighten the wheel arch retaining bolts.- Top up the windscreen washer fluid reservoir.- Remove the vehicle from the lift.- Check that the windscreen washer jets are working.