939010156 - W010 BLACK EXHAUST FUMES

A high level of dark coloured exhaust fumes is noted

0	PRELIMINARY CHECKS	All OK	Problems encountered	Operation
	Check whether the problem is associated with oil consumption	Move on to Step 1	Excessive oil consumption	See table X05 EXCESSIVE OIL CONSUMPTION
1	AIR CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check:- the state of the air filter;- the condition and seal of the air supply circuit	Move on to Step 2	Circuit component damaged	Replace the damaged component.
			Filter element dirty or damaged.	Replace the filter element    Op. 1048A14 AIR CLEANER FILTER ELEMENT - REPLACE.
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and check that none of the following errors are present in the engine management control unit:(only for 2.2 JTS version) P0130, P0133, P0134, P0135, P0136, P0139, P0141, P0150, P0153, P0154, P0155, P0156, P0159, P0161, P0300, P0301, P0302, P0303, P0304, P0420, P0430, P1135, P1141, P1155, P1161, P1172, P1173, P1175, P1176, P1607, P1608, P2097, P2099, P2237, P2240, P2243, P2247, P2251, P2254, P2263, P2414, P2415, P2416(only for 3.2 V6 version) P0130, P0133, P0134, P0135, P0136, P0139, P0141, P0150, P0153, P0154, P0155, P0156, P0159, P0161, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0420, P0430, P1135, P1141, P1155, P1161, P1172, P1173, P1175, P1176, P1607, P1608, P2097, P2099, P2237, P2240, P2243, P2247, P2260, P2262, P2263, P2414, P2415, P2416	Move on to Step 3	One of the errors listed is detected.	Continue following the instructions for the diagnostic equipment.
			No dialogue with the engine management control unit.	Restore the correct connection between the engine management control unit and the diagnostic socket    See E5030 PETROL ENGINES ELECTRONIC MANAGEMENT
3	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Keeping the diagnostic equipment connected, carry out the active diagnosis at the injectors	Move on to Step 4	Connections faulty.	Restore the correct connection for the injectors and the solenoid valve with the engine management control unit    See E5030 PETROL ENGINES ELECTRONIC MANAGEMENT
			Injectors faulty.	Replace the injectors    Op. 1056F70 INJECTOR ONE R R WITH FUEL MANIFOLD PIPE REMOVED INCLUDES GASKET REPLACEMENT
4	FUEL PRESSURE CHECK	All OK	Problems encountered	Operation
	Check the correct fuel supply pressure	End of diagnosis	Pressure not correct	Replace the fuel pump assembly    Op. 1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GAUGE CONTROL - R + R