939010367 - 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

The engine oil level check should be carried out with the vehicle on a flat surface with the engine off a few minutes (about five) after the engine has been switched off.

- Extract the engine oil dipstick, clean it and then fully reinsert it, extract it and check that the level is between the MIN and MAX marks on the actual dipstick.- If the oil level is close to or actually below the MIN mark, introduce the recommended oil through the filler until it reaches the MAX mark.

If, after checking, the engine oil level is above the MAX mark, it must be corrected.

After topping up the engine oil, before checking the level, let the engine run for a few seconds and wait for a few minutes after it has been switched off.

Component	Type	Description	Classification	Qty.	Validity
Engine lubrication circuit	Oil [l]	SELENIA STAR	SAE 5W-40 - FIAT 9.55535-M2	5.4	2.2 JTS3.2 JTS

The table shows the quantity for periodic replacement.