939005268 - 1056F55 LEFT CYLINDER HEAD INTAKE OR EXHAUST CAM ANGLE SENSOR - R.R.

Removing ( Refitting )

The procedure for the intake side sensor is described below, the operations for the exhaust side sensor are the same.

    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R. 1. Disconnect the electrical connection for the cam angle sensor, inlet side.

	Description	Connector
1	Inlet side timing sensor - left head	See K193 LEFT HEAD INLET SIDE TIMING SENSOR

2. Undo the bolt (2a) and remove the cam angle sensor (2b), inlet side. Refitting ( Removing ) - Position the cam angle sensor, inlet side in its housing and secure it using the bolt.- Connect the electrical connection for the cam angle sensor, inlet side.    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R